製品案内

Agitating Dryer KSN Type

ksn

Dry Effect

Due to the water evaporation caused by the heat which will be occurred during the process including the sun light, it can gain high dry effectiveness. As the All-In All-Out method is used for this model, the dry-rate can be adjusted by the number of days of agitating. It is suitable to adjust moisture as pretreatment before composting, and to dry up the product completely after composting.

 

Using Hatchet Blades

ks型 ksn型

The difference from the conventional dry machine KS model, is that hatchet blades are used instead of T-blades. They break up the raw materials into pieces, and by throwing them up in the air while mixing, the decomposition can be occurred easily.

Also, the feathers are decomposed and the final product becomes more valuable.

 All-In All-Out Method

all-in-out

First the ingredients are spread on the whole pit, the agitating will be completed after few days, and the product will be taken out at once. By using this method, the amount of the input can be decided by the length of the building as well as the drying-rate, which are different due to the seasons or environments are possible to be adjusted by the number of days of processing.

Machine Width 6m Specific Gravity 0.75
Raw Material Height 0.3m Retention Period Optional
Length of Rail 150m No. of Agitating 5~15times/day
Amount of Input (one time)
6m×0.3m×150m=270㎥  270㎥×0.75=202ton
202ton÷15days=13.5 ton/day
Model Pit width (mm) Rail height (mm) Height of raw material (mm) Blade
KSN-4000R 4,000 350 300 Hatchet
KSN-5000R 5,000 350 300 Hatchet
KSN-6000R 6,000 350 300 Hatchet
KSN-4000WR 4,000×2 350 300 Hatchet
KSN-5000WR 5,000×2 350 300 Hatchet
KSN-6000WR 6,000×2 350 300 Hatchet